Till innehåll på sidan
Till KTH:s startsida

Water Demand Forecasting from Multipurpose Reservoirs in Cochabamba, Bolivia, to 2050: A Sustainable Energy Perspective

The main objective of this research is to forecast the water demand from multipurpose reservoirs in the region of Cochabamba, Bolivia, through 2050. This will focus on water usage for agriculture, human consumption, and other human-related needs, considering the dual-purpose role of these reservoirs in supporting both water supply and electricity generation. The study will contribute to sustainable resource management by providing insights into future water needs and potential conflicts between water use sectors in a context of increasing demand and climate change impacts.

Background

Bolivia has significant potential in water resources, though its geography is highly varied, with stark differences from one region to another. Despite advancements in providing potable water access, the country still faces major challenges in water management and governance, particularly in the context of climate change. In the metropolitan area of Cochabamba, which comprises seven municipalities and is Bolivia's third-largest city, dry climate is experienced and has limited surface water resources. Most of the water supply comes from an aquifer that is progressively degrading and has insufficient recharge capacity, leading to severe water shortages (Agence Francaise de Developpement, 2019).

Cochabamba is a region known for its agricultural productivity and natural resources. However, despite its fertile land, water scarcity has become a significant challenge. The semi-arid climate of Cochabamba leads to highly seasonal and often insufficient rainfall, exacerbating water shortages. This issue was highlighted during the Cochabamba Water War in 2000, a major conflict over water privatization that underscored the difficulties in managing and distributing water resources.

The Misicuni project is a multipurpose initiative designed to meet various critical needs in the Cochabamba region. Its primary objective is to supply potable water to the urban population and the seven municipalities. In addition to providing drinking water, the project will deliver irrigation water to agricultural areas within its influence zone and generate electricity for the National Interconnected System (Empresa Misicuni, 2019).

Considering the multiple uses of water from reservoirs in Cochabamba, it is important to forecast the future demand to evaluate how water demands for agriculture and urban use impact electricity generation. Incorporating climate variables and projected water demand will allow for a better understanding of the interdependence between these sectors.

Task description

  • Conduct a literature review, focusing on water demand prediction techniques and water resource management strategies for multipurpose reservoirs. This will include studying existing methodologies, models, frameworks, and case studies that address similar contexts. The review will also assess how socio-economic factors, such as population growth and agricultural needs, influence water demand in Cochabamba.

  • Collect and process relevant data, including historical water usage from multipurpose reservoirs in Cochabamba. This will cover data on water allocation for agriculture, human consumption, and reservoir operations for electricity generation. Additional data will include governmental projects, population growth projections, climate change scenarios, and trends in agricultural demand.

  • Develop a predictive model for future water demand, integrating socio-economic factors like population growth, agricultural expansion, and climate variability. The model will be built using historical data and will simulate different future scenarios, helping to estimate how water demand will evolve in the region by 2050.

  • Perform scenario analysis to evaluate how water demand may change under different growth and climate assumptions.

Learning outcomes

After completing the thesis work, the student will be able to:

  • Develop expertise in predictive modelling for water demand using statistical and computational tools.

  • Acquire skills in analysing climate data and socio-economic trends to forecast future resource needs.

  • Learn to propose sustainable water management strategies that can mitigate potential conflicts between water use sectors.

  • Contribute valuable insights for policymakers on sustainable water resource management in Cochabamba, Bolivia, and similar regions.

If the work is of good quality and the student is interested, the research project will be designed to be suitable for a peer-reviewed publication in a high-quality journal.

Prerequisites

Students should be familiar with hydropower generation, Knowledge of hydrological cycles and water resource systems. Knowledge of software tools like Python. Experience with scenario planning and analysis. Critical Thinking and Problem-Solving.

Research Areas, placement and duration

Specialization/track:

Water Resource Management, Sustainable Development and Climate Change, Energy-water nexus.

Division/Department:

Division of Energy Systems, Department of Energy Technology

Research areas:

  • Open Tools for System Science

  • Science-Policy-Society Interactions

Duration:

20 weeks, starting January 2025.

How to apply

Send an email expressing your interest in the topic and your CV to the supervisors.

Supervision

Supervisor

Alizon Huallpara, PhD candidate

E-mail

Examiners/Advisors

Innehållsansvarig:Oxana Samoteeva
Tillhör: Energiteknik
Senast ändrad: 2024-09-19
Water Demand Forecasting from Multipurpose Reservoirs in Cochabamba, Bolivia, to 2050: A Sustainable Energy Perspective
Electrification of the heating sector in Europe
Safe use of flammable refrigerants-literature review
Safe use of flammable refrigerants-Modeling concentrations of the leaked refrigerants in case of accidental emissions in different scenarios
Boiling inside rectangular microchannels: Investigating the use of high-speed IR camera for temperature readings
Characteristics and kinetic study on catalytic and non-catalytic pyrolysis of PVC and wind blades in molten salts via thermogravimetric analysis
Characterization of Phase Change Materials for a real Thermal Energy Storage Application
Predictive model control design for a small-scale steam engine based multi-source CHP system
Solar hydrogen production by photocatalytic reforming of cellulose with concentrated sunlight
Circularity of batteries
Kartläggning och Optimering av kyla på KTH Campus
Battery application in harbour environment
Hydrogen production using agro-industrial waste
Investigation of usage of different methane fuel qualities for rocket engines with respect to the pyrolysis stability
Experimental study on the effect of temperature and pressure on the stability of methane in rocket nozzle cooling channels
Empowering the Future: Innovating Sustainable Energy with Digital Heat Pump Solutions
Optimizing Energy Performance in Existing Urban Building Stocks: A Comprehensive Analysis and Strategic Approach for Sustainable Operation
Characterization of the Large Areas Solar Simulator for PV/PVT testing
Development of Remote Battery Lab
Techno-economic and feasibility assessment for nuclear plants combination with CO2 sequestration and green fuels production units
Techno-economic and feasibility assessment for nuclear plants integration in flexible future energy systems for grid balancing and ancillary services
Analysis of Residual Resources
Life-cycle impact assessment of innovative cascade PCM based thermal energy storage solutions
Techno-economic assessment and optimization of seasonal thermal energy storage in district heating networks
Final Commissioning and Experimental Performance Characterization of a Bench-scale Thermochemical Heat Storage System (SEU/SPG)
Renewables and Demand Side Management
Power consumption and CO2 emission of HTTP servers
Circularity measurement for automotive industries
Experimental Investigation of Optimal Flow in Borehole Heat Exchanger at KTH Live-in Lab
Low Global Warming Potential Refrigerants for high temperature heat pumps
Development of battery test rig: Remote Battery Lab
Comparative analysis of thermal storage options for industrial steam generation in a solar thermal integrated system
Development, Implementation & Evaluation of an optimized operation algorithm for a Li-Ion battery Energy Management System (EMS) at Tezpur University
De-icing of trains in a Nordic climate
Calibration of a measurement system for methane pyrolysis detection in rocket nozzles
Experimental study on the effect of rocket nozzle wall materials on the stability of methane
Examensarbete om vattenflöden för bostäder
Evaluating the potential of energy efficiency improvement in combined cycle power generation to minimize the CO2 footprint in the context of Sri Lanka
Smart and Sustainable Oskarshamn: Energy Management and urban system analysis
Aqueous ammonia in refrigeration applications
Photovoltaic system design, installation and performance evaluation: PV Lab test rig
Ground source heat pumps in densely populated areas - a techno-economic study
Replacement of old ground-source heat pumps – a techno-economic study
PV-ESS system optimization to maximize self-consumption of PV-generated in KTH live-in lab
Environmental assessment of SESS applications based on cradle to grave LCA
High and low temperature electrolysis integration in Combined Cycles
Novel solar technologies and SOEC integration for synthetic fuels
Digitalization of HVAC schema drawings
Development & implementation of an improved operation algorithm for a Li-Ion battery energy management system (EMS) at Tezpur University
Techno-economical analysis of large refrigeration systems - operational and maintenance strategies
Comparision of high fidelity and real-time CFD methods for simulating thermal comfort
Data driven heat pump models for generation of electrical load profiles at DSO level
Master thesis at Bosch Thermoteknik
Enhancing Socio-Economic Impact Assessment in Climate-Compatible and Self-Sufficient Rural Communities through Integrated Resource Optimization Models
Developing an integrated resource optimization model of a river basin in Kenya
Climate impact of renovation projects in the built environment– zooming in on technical installations
Developing a spatial database for energy planning in Sweden
Developing a transport demand model for whole system energy planning in Sweden
Developing a residential demand model for whole system energy planning in Sweden
Towards Zero-Waste through a Circular Recovery Model – Lessons for Managing Municipal Solid Waste from Sweden and India
The role of renewable gases (ReNewGas) in the decarbonization of energy systems in the EU
Extracting insights from a Knowledge Graph of an ongoing research programme for Climate Compatible Growth
An approach to increase the effectiveness of use of modelling tools to inform climate-compatible development strategies in Low and Middle Income Countries
Land-based mitigation technologies, measures, and systems in negative emission pathways
Spatial analysis of district heating
Seasonal storages – way ahead for industrial decarbonisation?